Integrated Battery Energy Storage System

Energy
Infrastructure.
Engineered.

PowerPod delivers fully integrated IBESS solutions for commercial, industrial, and mission-critical environments — engineered for reliability where it matters most.

Request a Quote See the Technology
PowerPod 360 Integrated Battery Energy Storage System
180
Max kWh Capacity
15yr
Warranty
IP65
Ingress Protection
>85%
Round-Trip Efficiency
55%
Domestic Content
Storage Conversion Control Safety Reliability Deployment Storage Conversion Control Safety Reliability Deployment

What Sets Us Apart

Infrastructure.
Not a Component.

Traditional energy deployments rely on separate vendors for storage, conversion, and controls — increasing complexity, integration risk, and deployment time.

PowerPod consolidates all critical subsystems into a single, factory-tested unit. One platform. One point of accountability. Operational from day one.

PowerPod 360 open with deployed solar panels
Plug-and-Play
Architecture

Solutions

Built for Every
Energy Challenge.

From grid-connected commercial facilities to remote off-grid operations, PowerPod performs across the full spectrum of energy environments.

Backup Power
Immediate continuity during grid outages for critical operations.
Off-Grid Power
Reliable energy in remote or infrastructure-limited locations.
Peak Shaving
Reduce demand charges by supplementing grid supply during high-load periods.
Energy Arbitrage
Store during low-cost periods, deploy at peak pricing.
Renewable Shifting
Capture excess solar and wind generation for on-demand dispatch.
EV Charging
Stabilize load demand and reduce costly grid upgrade requirements.
Demand Response
Actively manage load to maintain grid system stability.
Microgrid Support
Operate within or independently of localized grid systems.
PowerPod system

System Architecture

Everything
in One Unit.

Every critical subsystem is engineered to operate as a coordinated whole — delivered factory-tested and ready to deploy.

01
LFP Battery System
Lithium Iron Phosphate chemistry. High thermal stability, deep cycle life, and significantly reduced risk of thermal runaway under demanding conditions.
02
Battery Management System (BMS)
Real-time monitoring of voltage, temperature, SoC, SoH, and cell balancing at the module and rack level.
03
Power Conversion System (PCS)
Supports both grid-forming (VF) and grid-following (PQ) operation for seamless integration across energy environments.
04
Air-Cooled Thermal Management
Engineered for reliable operation up to 114°F without the added complexity of liquid-based cooling systems.
05
Integrated Safety Systems
AFCI, GFDI, Rapid Shutdown, real-time thermal and smoke monitoring, and UL9540A-compliant fire suppression.
06
Site-Level Control Architecture
Coordinates energy flow, load balancing, and external system communication for full operational control.
240V
Output Voltage
or 208V / 3-Phase
60Hz
Frequency
0.22C
C-Rate
<65dB
Noise Level
IP65
Enclosure Rating

Configurations

Right-Sized
for Every Project.

Three capacity options — individually deployable or combined in multi-unit arrays to meet the exact requirements of your project.

60kWh
Standard
Battery ChemistryLFP
Voltage / Frequency240V or 208V 3-Phase / 60Hz
C-Rate0.22C
Ingress ProtectionIP55 / IP65
Operating Temp.0°F – 114°F
Noise Level<65 dB
Warranty15 Years
Request Quote
Most Popular
120kWh
Professional
Battery ChemistryLFP
Voltage / Frequency240V or 208V 3-Phase / 60Hz
C-Rate0.22C
Ingress ProtectionIP55 / IP65
Operating Temp.0°F – 114°F
Noise Level<65 dB
Warranty15 Years
Request Quote
180kWh
Enterprise
Battery ChemistryLFP
Voltage / Frequency240V or 208V 3-Phase / 60Hz
C-Rate0.22C
Ingress ProtectionIP55 / IP65
Operating Temp.0°F – 114°F
Noise Level<65 dB
Warranty15 Years
Request Quote

4 units can be transported per 40ft high cube container for large-scale deployments.

Intelligent Control

Energy You
Can Orchestrate.

PowerPod's site-level control architecture transforms energy from a fixed resource into a dynamic, manageable asset — responsive to load conditions in real time.

Grid-Forming & Grid-Following
Operates in both VF and PQ modes, enabling seamless transition between off-grid and grid-connected environments without system interruption.
Sub-Second Frequency Response
Provides rapid frequency regulation at 60 Hz, stabilizing variable renewable inputs and protecting sensitive equipment.
LVRT & HVRT Capability
Low and High Voltage Ride Through allows the system to remain operational during voltage events — preventing cascading failures and maintaining grid stability.
PowerPod AI Energy Management Dashboard
PowerPod logistics and deployment

Deployment

Deploy
Anywhere.
Fast.

PowerPod is factory-tested and pre-validated before shipment. No complex on-site assembly. No multi-vendor coordination. Plug in and power on.

Plan Your Deployment
Plug-and-Play
Minimal on-site installation requirements. Ready from day one.
Factory Pre-Validated
Every unit tested and verified before leaving our facility.
Container-Ready
4 units per 40ft high cube container — efficient global transport without specialized handling.
Third-Party Compatible
Seamless integration with generators, controllers, and existing infrastructure.

Deployment Environments

Where PowerPod
Goes to Work.

Commercial & Industrial
  • Manufacturing sites
  • Commercial facilities
  • Data centers
  • Healthcare infrastructure
  • Universities & research facilities
  • Water & wastewater systems
Remote & Off-Grid
  • Remote communities
  • Mining operations
  • Oil & gas sites
  • Island and isolated grids
  • Emergency response deployments
  • Military & government facilities
Utility & Grid
  • Grid balancing & stabilization
  • Renewable energy integration
  • Transmission deferral
  • EV charging networks
  • Microgrid deployments
  • Distributed energy systems

Standards & Compliance

Built to the
Highest Standards.

PowerPod meets the major safety, performance, and compliance certifications required for deployment in commercial, industrial, and utility environments.

UL9540 UL1973 UL1741 UL1741SA UL1741SB CSA C22.2 No. 107.1 CSA 22.2 No. 330 California Rule 21 HECO Rule 14H UL9540A Fire Safety FCC Part 15 Class B
15
Year Warranty
Every PowerPod unit is backed by a 15-year warranty, supported by a global service network of trained technicians and parts distribution centers.

Support & Service

We're with You
Beyond Deployment.

01
Dedicated Account Management
Every deployment is supported by a dedicated factory account manager with direct access to technical support, service coordination, and system expertise.
02
Global Service Network
A worldwide network of trained technicians, engineers, and parts distribution centers ensures long-term system performance and reliability.
03
Technical Consultation
Our engineering team is available to support deployment planning, system integration, and ongoing operational optimization for every project.

Get Started

Ready to
Deploy?

Tell us about your project and a PowerPod specialist will be in touch to discuss your deployment requirements.